KX-TD816 & KX-TD1232 Software and feature changes per revision for the Digital Super Hybrid System
Enhanced CID (Name and Number, Callback, Log).
Enhanced DISA (Single Digit Routing, Others).
Extension Name Display when Idle.
12 or 24 hour clock.
Message Waiting Ring for SLT.
Walking Class of Service.
CO line Names.
Emergency Call Numbers.
Account Codes increased to 128.
CID Name Number conversion increased to 500.
DISA User Codes increased to 8, 10 digit codes.
One Touch FWD/DND.
Operator 1 and 2 can do Manager Programming.
Operator 1 and 2 can Ring Simultaneously.
Internal Remote card can be set for 2400bps.
Remote Station lock CO or Intercom.
Remote Timed Reminder.
Bilingual Display (English or French).
SMDR now prints Condition Codes (Answer, No Answer, CID, Timed Reminder)
User Programming Mode.
Voice Mail ports increased to 8 (in DPITS).
System Working Report.
Data Dump Range.
ARS with Day of Week Route.
BSS can be executed to a ringing extension.
Call Park Recall Timer Prg 219.
EFA on center display button of 7230 and 7235.
DND stops Paging.
Prg 990 area 5 field 44 set if operator 1 and 2 ring simultaneously.
Function of remote station lock control changed.
Going off does not cancel Camp-On.
You can call the original extension from the destination extension of Call Forwarding.
SLT can now screen transfer to a CO line.
SLT can now do a EFA.
12 Mhz CPU.
74XX Series Phones.
KX-TD185 DID card.
KX-TD194 Message Waiting Unit.
KX-TD197 28.8 Modem.
KX-TD171 8 Expansion Card with CID to SLT.
KX-TD284, 382, 384, 386 ISDN Cards.
Hotel/Motel Room Status.
Night Service Buttons can be assigned to each Phone and Controlled by COS.
OHCA can be assigned by COS.
Off Hook Monitor with KX-T7431, 7433, 7436.
Whisper Off Hook Call Announce with KX-T7420, 7425, 7431, 7433, 7436.
System Speed dial increased to 500.
Max Number of VM ports increased to 12 (in DPITS).
DISA User Codes increased to 32.
Intercom Ring Tone Selection.
CID Area Code increased to 10.
Station Paging Deny.
Phantom Extension Ringing ON/OFF.
You can blind transfer to a Phantom, Ring Group or UCD.
KX-TD187 T1 Card. (KX-TD1232 only)
KX-TD198 Remote Card. (KX-TD816 only)
Lunch Break Mode.
Other Extension Message Lamp Indicator.
Voice Mail Port Name.
VTR to a Phantom Mail box.
MWL For Phantom Extensions.
Selectable FWD/DND Flashing Pattern.
All Extensions In A Group Can Log Out.
Restrict CO Key Programming By COS.
EIA Tool Can Set FWD/DND Mode.
Different FWD No Answer Timer For Every Extension.
Beep Tone For MOH.
Called Number Display. (ISDN)
Caller ID integration With The KX-TVS50.
Speakerphone Features Disabled When A PITS Cordless Is Connected. (BGM, LCS Hands Free Mode, Voice Call, Paging)
TAPI 2.1 Compliant. (Telephony Applications Programming Interface)
NOTE: For upgrade to current -5 version system software, see below.
Any system with a Serial Number Code Date less then "0L" requires a CPU board upgrade.
Systems with a serial number of "0L" or newer only need to change the chip set.
First Digit = Year of Manufacture.
Second Digit = Month of Manufacture.
CPU's , Chip Sets & Installations are available from us.
Installation of these upgrade should be performed by a Certified Panasonic Dealer.
The chart below specifies the details required for upgrade.
|Current System||Upgrade to||Required|
|KXTD308-3||Current Version -3||No Upgrade required|
|KXTD1232*||KX-TD1232-1||Software EPROM’s & SRAM’S|
|KXTD1232-1||KX-TD1232-2 through -5||Software EPROM’s and CPU|
|KXTD1232-2||KX-TD1232-3 through -4||Software EPROM’s Only|
|KXTD1232-4**||KX-TD1232-5||Software EPROM’s Only.|
|KXTD816||KX-TD816-1||Software EPROM’s & SRAM’S.|
|KXTD816-1||KX-TD816-2 through -5||No Upgrade Possible.|
|KXTD816-2||KX-TD816-3 through -5||Software EPROM’s Only.|
* KX-TD1232 systems manufactured February 1995 and before with serial numbers 5B and before require Service Center modification. This means we can either send your system to the Panasonic Service Center for upgrade, or we can install a new CPU Board at your location and reprogram your system on site. Please check with us @ 800-520-4246, We have several boards in stock that have already been upgraded.
If your system has the following Serial numbers it will require tech bench upgrade at our facility.
3xiAxxxxxx (PC Board Modification)
4aiaxxxxxx (PC Board Modification)
4biaxxxxxx (PC Board Modification)
4cia000000 to 4cia000214 (PC Board Modification)
4Jxxxxxxxxx (Solder in SRAM)
4Kxxxxxxxxx (Solder in SRAM)
4Lxxxxxxxxx (Solder in SRAM)
5Axxxxxxxxx (Solder in SRAM)
5Bxxxxxxxxx (Solder in SRAM)
** KX-TD1232-4 systems manufactured from December 2000 with serial numbers "0L" onwards can be upgraded at your location to DASH -5 with software E Proms only. KX-TD1232-4 systems with serial numbers prior to "0L" and all earlier version of the KX-TD1232 systems will require a CPU upgrade which can also be performed at your location. Please contact us for you chip Upgrade request @ 800-520-4246
-3 P231M / U
-4 P211A / D
-5 P211K / M
What's New For -6 ?
DASH-6 release and the integration of the new T1 PRI card released summer 2002.
Currently only ISDN-BRI is supported for the KX-TD816 & 1232 PBX Systems.
What is ISDN-BRI ?
(Integrated Services Digital Network - Basic Rate Interface)
Highest Bandwidth: Two 64 Kbps (64 Thousand bits per second) channels and one 16 Kbps data channel, which can be combined to give you 128 Kbps.
Best used for: Dial-up data, voice videoconferencing, multiple links on a single telephone line.
What is ISDN-PRI ?
(Integrated Services Digital Network - Primary Rate Interface)
Highest Bandwidth: 23 Channels of
64 Kbps and one 16 Kbps data channel, which can be combined to give you 1.5
Mbps (1.5 Million bits per second).
Best used for: Dial-up data, voice videoconferencing, multiple links on SAME telephone line.
Version 7 was the last release before this phone system was discontinued
No firmware differences between the -6 & -7.